Float Blocks

product was awesome. work great that

The color green isn’t even close to what green you get

Easy to install and work as advertised. They are also useful to put on to protect the cable from pinching while doing tire changes.

Love that I can still use my mag handle and keep my motor temps down a little bit over stock axle blocks. Did I mention I love the color! So nice.

A great way to cool ur motor and a better way to add steeze!

Absolutely second to none!!!

Great looking machined blocks that fit perfect and helps strengthen axle bolts. Using allen head bolts instead of torx would be nice though!

These are super easy to install. The only issue is that the bolts have a lot of blue locktite on them and make it virtually impossible to screw in. I had to scrape of some of it before the screws would fully seat. Easy solution to a minor issue. The blocks are really well made and so far seem to work well. No overheating, so they must be working!!

Adds that lil extra that you need for the motor cable. Easy to install and love the look.
They're also compatible with chillers from land-surf.

Peace of mind for curb drops and jumps. TFL killing it as usual!

I absolutely love my Float blocks not only did they make my Onewheel look better but they also keep my Onewheel a little bit cooler in the summer while I ride And they increase my axle strength which is nice for when I’m dropping off ledges. there a definite must have if you own a Onewheel.🤙🏻✌🏻

definitely should get this, very easy to install and protects your cable more also. The cable has definitely gained more length and is just a touch hard to plug in and fit in the rail but it keeps it very secure. Would 100% buy again

Great product overall, but I really wish the bolts provided had were closer to a standard Mxx Socket Head Hex Screw. The shallow depth of the bolt head in combo with the tp45 makes it very easy to cause the driver to cam out.

As my skills have progressed, my boards take worse and worse beatings. With the added axel strength, I feel more confident sending it over progressively gnarlier terrain. With these Float Blocks, I don't have to worry about bending my axel. Plus they also add style points and help with cooling. overall, they are solid. If you have some extra cash, get them for the piece of mind.

I have GT-S so the cable now feels a bit too _long_, and (hopefully) I won't have to change my tire anytime soon, cause I'd have to de-assemble 1 rails, cold ones, life-saver...

But until that time comes, I feel that the axle sits pretty tight and stable, there should be no risk of breaking it and with a better cooling. Arguable it looks better than the stock blocks too.

Picked these up 1, I live in Az where temperatures this past year reached 119 & 2, I am a TRUE CLYDESDALE at 290, previously 316. Not only does it strengthens the axel, but it also helps dissipate the heat. Win..win no matter how you put it.

really nice anodizing and well-machined heat sink fins, they’re a great addition to my GT. not sure if the mag handle will work with an MTE hub. I didn’t try too hard and ended up leaving it off. all in all, more billet sexiness from our fav TFL innovators

Flock blocks in fun metal adds 2HP and 69% more strength!? LEGGO!

I installed the TFL Float Blocks on my WTF GT and can say that the increased motor cable length alone is well worth the investment. Prior to this, I’ve busted two of the motor cable o-rings and even with the TFL cable retainer, my motor cable cord was so short & tight that it was just barely being held in. The plastic o-rings were actually breaking on their own whenever the cable received any additional strain (ie: picking my board up by the rails and accidentally squeezing the motor cable).

Now with the Float Blocks, my motor cable has so much extra length that it’s actually pushing the plug straight into the controller with its own pressure. My latest replacement plastic o-ring is tightening properly and as another back-up, the TFL motor cable retainer is now able to also fully secure the cable in place. It’s just an added bonus that these blocks are also adding strength to the GT axles and provide a bit of additional heat dissipation.

Anyhow, I strongly recommend that you pick some up if you have the short motor cable issue like I did. These solve it 100% and give you peace of mind that your motor cable isn’t going to disconnect on you while riding bumpy trails.

These float blocks are one of the best upgrades on my board! Goodbye stock blocks and hello increased strength by 69%! I had a short motor cable so these were a perfect solution to giving some slack for my new rails as well! 100% get these blocks!

Over time I think many GT axles will fail. My first axle break happened at 6500 miles and after replacing the motor I wanted a preventative solution. Float blocks were easy to install and promise to be a solid investment for anyone hoping to keep their GT rolling. I have a lot of hope that’ll I’ll still be cheering this on after another 6k.

The installation went well, follow the videos and you'll be good to go.

I was surprised at how much motor cable length it gained me with the Steep & Deep rails. Before installation I needed the motor cable clip, after there was positive pressure to the plug, not tension.

I love how the TFL Team is solving the hidden issues with the board, in this case they're strengthening it while also adding in some cooling. Brilliantly done.

Fits with the Cold Ones, if anyone is wondering.

As a bigger rider aka Clydesdale, I considered many options to strengthen my axle, having not known of the GT's fatal flaw before purchase. Serendipitously, TFL releases the product I need at just the right time.

These things are dense and look awesome, have cooling fins, strengthens the axle by a 'nice' amount and works with Cold Ones! Win win win win. Win⁴!
Did I mention they work with Lifesavers and the stock carry handle? At this price, it would be insane to not at least get these to save your axle from gnar induced destruction.
Thanks, TFL crew! I love you ❤️

Cant wait to install them

The fit and finish on these blocks are excellent! The extra length for the motor cable made it a lot easier to install my WTF rails. I appreciate the peace of mind in not having to worry about my axle snapping without the added weight of other solutions. The cooling fins and the fact that it's anodized seem to keep my motor much cooler, although I haven't gotten to test it on a hot day yet. Another great production and innovation by The Float Life!

These are sick. They look great. I got black for that OEM look.

The added motor-cable length is worth it for the peace-of-mind that your GT motor will never let go 🚢

I had no fitment issues with my Stone Cold Chillers, and everything is SNUG. I used some blue locktite on the included 4 bolts (wasn’t included in my box but it should be in yours!)

5 stars all the way ⭐️⭐️⭐️⭐️⭐️

Thanks TFL for another sweet upgrade!! 🙏🙌

Shout out Brandon for the extra sweet TFL goodie swag hook-up! 🙌🙌🙌

Peace of mind. Love the design!