Product Description
These custom molded Controller + Battery Gaskets are a beautiful replacement for the stock gaskets. After months of research, Badgerwheel has taken state of the art to the next level with a gasket that actually works. Gone are the days of swollen gaskets that can’t be re-assembled, or pinched gaskets that don’t seal. This one is badger tested and approved. No grease or silicone is needed to keep it in place.
Includes:
- 1 Controller Gasket
- 1 Battery Gasket
Product Description
These custom molded Controller + Battery Gaskets are a beautiful replacement for the stock gaskets. After months of research, Badgerwheel has taken state of the art to the next level with a gasket that actually works. Gone are the days of swollen gaskets that can’t be re-assembled, or pinched gaskets that don’t seal. This one is badger tested and approved. No grease or silicone is needed to keep it in place.
Includes:
- 1 Controller Gasket
- 1 Battery Gasket
Similar products
P
Patrick Martin Great fit. They hold there shape for lid removal without worries.
K
Kyle Great product. Have one in every build I do.
M
Michael Lewis Not much to say than far better than the stock gasket doesn't try to roll out of place during install it's as simple as just set it in place and it's a perfect fit I don't see how anyone would have an installation problem
M
MrWangsta Gasket for my GTV build🤙🏼
D
Dirt McGirt I recently converted my GT over to GTSFO and thought since I would be opening both the controller and battery boxes that it would be a good time to replace the Gaskets. These are easy to install and the blue color matches my boards theme and are nice to look at with the lids removed. When assembling the board you can tell that the lids squeeze against the Gaskets and are creating a nice 'seal' as designed. I dont plan on riding through water or submerging my board, but i do feel confident that no dust or debris will be entering the boxes.
- 5 stars: 46 (98%)
- 4 stars: 1 (2%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
P
Patrick Martin Great fit. They hold there shape for lid removal without worries.
K
Kyle Great product. Have one in every build I do.
M
Michael Lewis Not much to say than far better than the stock gasket doesn't try to roll out of place during install it's as simple as just set it in place and it's a perfect fit I don't see how anyone would have an installation problem
M
MrWangsta Gasket for my GTV build🤙🏼
D
Dirt McGirt I recently converted my GT over to GTSFO and thought since I would be opening both the controller and battery boxes that it would be a good time to replace the Gaskets. These are easy to install and the blue color matches my boards theme and are nice to look at with the lids removed. When assembling the board you can tell that the lids squeeze against the Gaskets and are creating a nice 'seal' as designed. I dont plan on riding through water or submerging my board, but i do feel confident that no dust or debris will be entering the boxes.
S
Steven Conly package processed and shipped same day. Everything was personalized by the team. Appreciated the goodie bag
R
Ryan Perfect fit, looks rad too
O
Olaf When you plan to go inside 1 or both of the boxes you will want to have a spare gasket. Stock ones RARELY fit back in the groove.
This is the move.
Get a cool color and you can see it through the lid. You can see if it got pinched when you go to screw down the lid, nice lil bonus feature.
A
Anthony Toney Can't really say much about this yet as I'm slowly getting in parts and working on a VESC board. Pretty sure it's gonna be fantastic for the battery and controller box from all the YouTube videos I've seen. 👍🏾👍🏾🤙🏾🤙🏾
A
Anthony Can't really say much about this yet as I'm slowly getting in parts and working on a VESC board. Pretty sure it's gonna be fantastic for the battery and controller box from all the YouTube videos I've seen. 👍🏾👍🏾
M
M.N. Awesome!
I
Isaiah Keith Fell off the board, it went rolling into a river. Was in there 30 seconds completely submerged and I found it because the controller box held air. Got it out, disassembled, and there was no water in the board at all. Incredible! Thanks Float Life!!!
A
Andy Piece of cake to install and beautiful Tiffany color
D
D White Haven't installed the set yet but it looks like a good set
M
Matt Rodger Badger Controller + Battery Gaskets (GT/GT-S/XRC)
B
Blaze Schacht Pretty much just gotta tear the board all the way down might as well give er a good clean while yours there n put that silicone on n we’re good to go
S
Shaun Clark I like everything about it!! The only problem is it voids my warranty. I wasn’t aware of this prior to purchase. I have been told to just install it as OW will not warranty water damage otherwise. I’m not sure what I am going to do, board is brand new GTS Rally!
K
Kyle Arn This is a great product! I would say if you’re an all season rider it’s a must. FM is getting better with QC but no one knows how to seal up a board better than the Badger…..🦡
D
David Charles It doesn’t matter what you buy from these guys, they are an amazing group of people, with amazing products, and amazing support.
We Love everything they have to offer!
Thanks guys!
J
JP Great replacement for stock gaskets. They work!
C
CB Christmas 🎄 🤞
T
Timothy Beerman These gaskets seal the box’s so much better than the stock ones. Especially if you plan on working in these GT/GTS boxs
O
Omar Jasso These gaskets are perfect, a few notches above the stock. Perfectly fitted, nice and thicc to seal all the dust and moisture out. If you're cracking those boxes open for any reason (or if you plan to), go ahead and throw these in your cart.
J
Jack Wall I tried to 3D print my own out of TPU, but they didn't work nearly as well as TFL ones. They fit perfect and provided a great seal! Also, the two pack is great!
J
Jesse Better safe and sorry. So glad for the 2 pack!
O
Onewheelwanderer Great packaging install super easy and big quality difference from stock seal
G
Garry Mullins I opened the battery box to install XT60 retaining clips because I'm paranoid, and when I tried to fit the original gasket back in, it didn't even fit! Wild. I'd have to use silicone to keep it in place. TFL gasket fit like a glove.
I immediately ordered another set because I can't open my other GT's battery box until I have another TFL gasket. Shipping to Canada isn't cheap but my safety is worth it. Thanks TFL.
M
Marcos Gonzalez What can I say the fitment is perfect and so far its sealed … definitely a must if your stock one is not passing the sniffer test and when you take the lid off.
Love your rad Badger gaskets!
L
L.C. These gaskets are 3d printed but the filament is softer than TPU, and the fitment is very precise. I understand that if not printed on a well calibrated printer, this can cause water damage, but still, can we please get STLs for the battery box and controller gaskets and print at our own risk?
J
Johnny Li These fit perfectly. I hope TFL plans to come out with a few different colors.
R
Robert Taylor Bought it and haven't had a problem since !!! Perfect fit 👌 just amazing
By completing this form, you are signing up to receive our emails and can unsubscribe at any time.